The PC case
that feels
like furniture.
Most PCs hide — under desks, pretending they don't exist. Timbrcase is the opposite: a small, quiet, solid-birch case, adding warmth and a calming energy to your space.
Six sides.
Nothing to hide.
A case earns its keep from every angle. Front, back, profile — there's no "good side" you're meant to point at the wall.
A hidden power LED that only shines through the wood when the computer is on. In the same spot, the wood itself becomes the button — a soft press, a quiet click, and your computer wakes up.
A grille of small hexagons, laser-cut with high precision — made for the look as much as for the build. It lets your computer breathe easy and stay cool.
One side wears the full honeycomb. The other keeps just a single line of hexagons along the top — enough to release the heat that gathers up there — while the rest stays a clean, open plane of wood, alive with its natural marks.
A clean, standard ITX I/O cut-out and a single opening for the PicoPSU. The wood is left thicker around it, so plugging the power cable in and out always feels solid.
Look around the case and you can count every layer — each laminate of birch, bonded with a natural wood glue, finished to feel like one quiet, continuous piece of timber.
Five steps.
Built by a small circle.
The wood comes from a family-run timber supplier in Europe, and from there everything happens in one small workshop in Germany, close to the river Rhine — cut, bonded, sanded, finished, mounted, and tested by hand before it leaves.
Built in Germany, from wood sourced across Europe — together, that makes every case 100 % made in Europe.
Every case is a small piece of design art. Because each panel of wood has its own grain, its own flaws, its own light — no two Timbrcases will ever be exactly the same. Yours will only ever be yours.
Choosing the wood
We work closely with a traditional family-run timber supplier who provides us with the highest-quality multiplex birch plywood — and other European woods on request. All sourced from Europe. Every Timbrcase is built from high-quality multiplex birch.
Cut
Each panel is laser-cut to a precise pattern and inspected by hand. Any natural marks in the wood are kept where they add to the character of the case, never take away from it.
Bond
The pieces are carefully glued together with a natural timber glue, sanded smooth, and finished to your wish — natural, oiled, or stained. More elaborate finishes are available on request and may add to the cost.
Mounting
The mainboard standoffs, the power LED, and the wooden power button — wired and ready to plug straight into your mainboard — are mounted by hand.
Final inspection
Every case goes through a final inspection and test to make sure everything runs smoothly and the ITX board sits exactly where it should.
The case,
up close.
A few quiet moments with the prototype — the grain, the grille, the light moving across the wood.
Note: some photos show internal hardware (mainboard, components) for context only — these are not part of the case and are not included.
Three choices.
One case, just for you.
Every Timbrcase is built to order. A few small choices shape the size, the look, and where it will live — the rest is in our hands.
Not sure yet? Tell us about your build and we'll guide you through it.
The size
Pick the form factor that fits your build — Mini-ITX (three layouts: Minimalist, with SSD holder, or SSD + GPU), Nano-ITX, or full ATX.
The finish
Three finishes that protect the wood while keeping its natural look — hardwax oil, a matte water-based clear coat, or hand-rubbed furniture wax. On request, a deeper, darker tone or a piano-like high-gloss finish can also be done.
Where to ship
Choose where to ship your case — and soon you can move your hardware into your Timbrcase!
Built around
your hardware,
not the other way around.
The first run is ITX — the prototype shown in the photos has since been refined, and you'll receive a perfected version of the case you see. If your build needs more room, or much less, write me and we'll figure it out together.
Mini-ITX
Available nowThe size we build first, and the one we keep coming back to. Small enough to live on a shelf, big enough for a real GPU. Three layouts to choose from: Minimalist, with SSD holder, or SSD + GPU.
- ▸ Mini-ITX board (170 × 170 mm)
- ▸ PicoPSU powered
- ▸ Hidden power LED & wooden button
- ▸ Laser-cut hexagon airflow
- ▸ High-quality multiplex birch
Nano-ITX
On requestThe smallest of the family. Built around a Nano-ITX board with an APU or low-power CPU — no discrete GPU. Compact, silent, and perfectly suited for a tidy desk or a quiet living room.
- ▸ Nano-ITX board (120 × 120 mm)
- ▸ APU or low-power CPU
- ▸ PicoPSU powered
- ▸ Silent, fanless-friendly layout
ATX
Custom commissionFor the bigger builds — water cooling, room for any graphics card no matter the size, mounts for radiators, a separate chamber for the PSU and clean cable management, even a glass front if you want one. Built to the same standard as any high-end metal case — only in wood. ATX builds take more time: plan with 2–3 months so we can hold the quality your case deserves.
- ▸ ATX or Micro-ATX board
- ▸ Full ATX power supply, separate PSU chamber
- ▸ Any GPU, any size
- ▸ Water-cooling & radiator mounts
- ▸ Optional glass front
- ▸ Build time: 2–3 months
The first batch
is small on purpose.
We work batch by batch — keeping the standard high and the price fair. Choose your case, drop your email, and we'll get in touch.